About
Location :
Added by Nilgrib Mondal, at 24 September 2025
Opening Hours
- Monday 06:00 AM - 12:00 PM
- Tuesday 06:00 AM - 12:00 PM
- Wednesday 06:00 AM - 12:00 PM
- Thursday 06:00 AM - 12:00 PM
- Friday 06:00 AM - 12:00 PM
- Saturday 06:00 AM - 12:00 PM
- Sunday 06:00 AM - 12:00 PM
Area We Serve / Branches
Kolkata
Frequently Asked Questions (FAQ)
- How long should it take for my wallpaper to dry out naturally??
For wall coverings to fully dry out it could take from 2 to 7 days, dependent upon the type of wall covering and other factors, such as wall surface, adhesive and atmospheric condition etc. - What causes shrink back (joints between drops opening)??
There are several reasons why wallpaper may shrink; the soaking time was not adhered to. It is absolutely necessary that the pasted lengths are left to soak for the time advised on the wallpaper label. Shrinkage occurs when the wall covering does not adhere to the wall properly before drying. Most wall coverings expand when wet and will try to shrink back on drying if the wall adhesion is poor or the paper is over-stretched. If the wall surface has been correctly prepared, the paper will soon adhere to the wall and should not shrink back whilst drying. Poor wall adhesion can be caused by poor wall preparation or by too little/too weak adhesive and the wall covering starting to dry out before the hanging commences. Shrink back also occurs when the room temperature is too high during the drying period. We always recommend that radiators are turned off to allow the wall covering to dry naturally. If the room temperature is too high, the rate of contraction (shrink back) will be accelerated and will exceed that rate of adhesion. - What causes bubbling or creasing on the wall after hanging??
There are generally two types of bubbles associated with hanging wall coverings which are either due to trapped air or more seriously, continued expansion: Air bubbles can generally be identified by their shape and will show themselves as a relatively ’round’ type bubble. These are caused when the paper is smoothed unevenly. The best way to avoid air bubbles is to gently brush the paper down the centre and then out to the edges as you work down the sheet. If bubbles are immediately identified as the wall covering is being hung then simply lift the wall covering from the bottom and re-brush/smooth it back down. Air bubbles will reduce slightly upon drying, but will not disappear completely. Pricking them with a needle and then attempting to brush them out after they have dried will almost certainly result in creasing. Expansion bubbles or creases are caused by continual expansion of the wall covering. This occurs when the paper has not been left to soak for the recommended time. They normally present themselves as short elongated bubbles, running parallel to the length of the wall covering and tend to look staggered across the sheet. It is highly unlikely that these type of bubbles will reduce upon drying or be removable once dry. - What type of paste should I use??
Most commercially available pastes will work for the majority of wallpaper projects. However, some heavy grade wallpapers might require a stronger adhesive. We do recommend Bartoline a high quality, easy to mix adhesive suitable for hanging all wallpaper types. - Do I need to order extra wallpaper for a pattern repeat??
Yes, you will need to consider the usable yield (the amount of each roll that is usable). The usable yield will depend on the length of your repeating pattern. The longer the pattern, the less usable yield. You will need to order additional rolls of wallpaper to match your design’s horizontal sequence.
Gallery
Add missing information
Reviews
No reviews yet. Be the first to add a review.
